
Smart Cabinet Distribution Unit Operations • 37
Installation and Operations Manual
Setting the LED display orientation:
The Set Option Display command is used to configure the Current LED(s) display orientation.
To set the LED display orientation:
At the Smart CDU: prompt, type set option display, followed by normal or inverted and press Enter.
Example
The following set the LED display orientation to Inverted:
Smart CDU: set option display inverted<Enter>
NOTE: When set to Inverted, the load will be reported in whole ampere increments
Enabling or disabling strong passwords:
The Set Option Strong Password command is used to enable or disable the requirements for strong
passwords. When enabled, all new passwords must be a minimum of 8 characters in length with at
least one uppercase letter, one lowercase letter, one number and one special character.
To enable or disable strong passwords:
At the Smart CDU: prompt, type set option strong password, followed by enabled or disabled and
press Enter.
Enabling or disabling the external configuration reset button:
The Set Option Button command enables or disables the external configuration reset button. This
feature can enhance system security by protecting the Sentry configurations from being reset locally.
NOTE: If this feature has been enabled and the administrative account username/password has been lost, then the Sentry
must be returned to the factory for non-warranty reset of the configuration.
To enable or disable the configuration reset button:
At the Smart CDU: prompt, type set option button, followed by enabled or disabled and press Enter.
Enabling or disabling the ‘more’ prompt:
The Set Option More command enables or disables the ‘more’ prompt for display of data larger than the
terminal window.
To enable or disable ‘more’:
At the Smart CDU: prompt, type set option more, followed by enabled or disabled and press Enter.
Setting the temperature scale:
The Set Option TempScale command sets the temperature scale that the Sentry will report in.
To set the temperature scale:
At the Smart CDU: prompt, type set option tempscale, followed by celsius or fahrenheit and press
Enter.
Displaying system options:
The Show Options command displays all system option information.
To display system option information:
At the Smart CDU: prompt, type show options and press Enter.
Example
Sentry: show options
System Options
Display Orientation: NORMAL
Strong Passwords: DISABLED
Configuration Reset Button: ENABLED
More Prompt: ENABLED
Temperature Scale: CELSIUS
Komentáře k této Příručce